转贴Alexander Romashchenko制作“Le Requin”的过程（9）

old_cobra · 发表于 2009-7-31 08:30:34

接上回~~

Mon Mar 23, 2009 5:44 pm • Post subject:
Installation stern bas-reliefs.
安装船尾浅浮雕

Tue Mar 24, 2009 8:54 pm • Post subject:
Installation of carvings. Continious.
雕刻件的安装，继续

Wed Mar 25, 2009 7:07 pm • Post subject:
Installation of the carvings. Finishing.
雕刻件的安装，完成

old_cobra · 发表于 2009-7-31 08:33:59

[fbdsbsb] [fbdsbsb] [fbdsbsb]

Sat Mar 28, 2009 6:10 pm • Post subject:
Cannons. Installation.
炮，安装

Sat Mar 28, 2009 7:33 pm • Post subject:
That looks beautiful, but I'm a bit puzzled. The gun is run out, yet the train tackle is already at its shortest position.
这看起来漂亮，但我有点纳闷。炮是放完的，然而一系列滑轮已经在最短的位置了。
Druxey

Sat Mar 28, 2009 8:44 pm • Post subject:
You are right, Druxey. Really on the drawings (and I made Xebek strictly according the drawings including cannons and pulleys) and book included hinder pulleys not mantioned at all. May be for 8 pounds cannon above pulleys is not necessary. I am showing those pulley for better fixing cannons on the deck to aviod gluing the cannons.
你说得对，Druxey。的确在图纸（我是严格按照图纸制作的，包括大炮和滑轮）和书上包括阻止滑轮根本没有提到。可能对于8磅炮上述滑轮是不必要的。我显示这些滑轮为了更好的在甲板上固定大炮，避免用胶粘合的大炮。
_________________
Regards Alexander

old_cobra · 发表于 2009-7-31 08:36:27

[fbdsbsb] [fbdsbsb] [fbdsbsb]

Sun Mar 29, 2009 1:46 pm • Post subject:
Cannons. Installation. Some detailes.
炮，安装，一些细节

old_cobra · 发表于 2009-7-31 08:38:22

[fbdsbsb] [fbdsbsb] [fbdsbsb]

Tue Mar 31, 2009 8:52 pm • Post subject:
Cannons. Installation. Main work done.
炮，安装，主要工作完成

old_cobra · 发表于 2009-7-31 08:40:56

[fbdsbsb] [fbdsbsb] [fbdsbsb]

Thu Apr 02, 2009 7:38 pm • Post subject:
Cannons. Installation. Continious.
炮，安装，继续

dudu · 发表于 2009-7-31 09:44:40

很好的学习资料。[vse4bb]

714333695 · 发表于 2009-7-31 09:57:38

好东东啊
学习学习

老叶 · 发表于 2009-7-31 10:07:29

太美了，谢楼主多发好东西

saill · 发表于 2009-7-31 10:26:55

做的太漂亮了[vse4bb]

aucmaswcw · 发表于 2009-7-31 12:57:28

[vse4bb]职业玩家的水品就是不一般，还要继续努力学习啊[fbdsbsb]

		自动登录	找回密码
密码			注册